Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities

1.Establish requirements for semiconductor equipment systems and components
2.Organize, participate, and lead in the feasibility studies, conceptualization, modeling, analysis, development, documentation, and test/validation of hardware associated with new semiconductor equipment
3.Develop and present reports/presentations that communicate design intent, analysis, and validation at executive-level meetings.
4.Lead multi-disciplinary development teams, serve as an expert resource for a product or technical area, and directly support personnel in the preparation of detailed design, design testing and prototype fabrication
5. Analyze designs developed – may need to perform structural analysis (FEA), thermal and fluid flow analysis, and Failure Modes and Effects Analysis (FMEA)
6. Lead problem solving teams including root cause identification, brainstorming and conceptual development
7.Work with potential suppliers to ensure parts can be manufactured in accordance with performance and cost objectives
8.Provide on-job training (OJT) for other engineers

Qualifications

1.Engineering background with thermal designs and/or RF system designs coupled with solid engineering skills
2.Minimum of 12 years related engineering experience with a Bachelor’s degree; or 8 years and a Master’s degree; or a PhD with 5 years’ experience; or equivalent experience
3.Extremely knowledgeable using 3D-CAD tools, strong hands-on experimental and design capability
4.Excellent presentation skills; present progress on large cross-functional initiatives at executive-level meetings
5.Strong skills and experiences in problem solving, time and priority management, communication, and project management

Preferred Qualifications

Semiconductor industry experience is not required, but a plus.

Job Descriptions：

Responsibilities

1. R & D machine operation, menu editing and basic maintenance 2. Use of measuring equipment such as film thickness, particle size and electrical properties and data management
3. Manage wafer use, cleaning and reuse 4. Assist process engineer to sort out and analyze data.

Job requirements

1. Bachelor degree or above, major in chemical engineering, materials science and other related majors; Can practice for more than half a year
Excellent people can relax the requirements, and the specific salary is negotiable.

Job Descriptions：

Responsibilities:

1. Equipment mechanical assembly, and fill in the corresponding documents
2. Equipment electrical assembly, testing
3. Preparation of new equipment transformation instruction

Job requirements:

1. Familiar with mechanical specialty, able to read mechanical assembly drawings
2. Familiar with electrical professional, electrical knowledge, can understand electrical interconnection diagram, schematic diagram.

Job Descriptions：

Responsibilities:

Responsible for the electrical and automation related work of the company's independent research and development equipment.

Job requirements:

1. Familiar with the application of servo motor, independent ability to complete the electrical system design of automation equipment, familiar with Omron, Siemens, Mitsubishi, Panasonic and other Japanese PLC, HMI
2. Familiar with design software; Familiar with electrical design specifications and national and industrial standards of low voltage products
3. Knowledge of electrical and automatic control, familiar with electrical standards, electrical wiring, electrical control cabinet design, functions of various electrical components, technical parameters and electrical component selection

Job Descriptions：

Responsibilities:

1. Bachelor degree or above in image processing, computer graphics and other related majors, with good communication skills and sense of teamwork
2. Strong programming ability and good programming habits, more than 2 years of C / C + + programming experience
3. Proficient in basic concepts and common algorithms of image processing, including image preprocessing algorithm and advanced processing algorithm; Familiar with image-based pattern recognition algorithm, master feature extraction, feature statistical design
4. Familiar with one or more tool libraries in opencv, MATLAB and Halcon
5. Proficient in English, able to read and understand professional English materials
6. Good communication skills and teamwork spirit
7. Working experience in semiconductor industry is preferred

Job Descriptions：

Responsibilities:

1. Bachelor degree or above in image processing, computer graphics and other related majors, with good communication skills and sense of teamwork
2. Strong programming ability and good programming habits, more than 2 years of C / C + + programming experience
3. Proficient in basic concepts and common algorithms of image processing, including image preprocessing algorithm and advanced processing algorithm; Familiar with image-based pattern recognition algorithm, master feature extraction, feature statistical design
4. Familiar with one or more tool libraries in opencv, MATLAB and Halcon
5. Proficient in English, able to read and understand professional English materials
6. Good communication skills and teamwork spirit
7. Working experience in semiconductor industry is preferred

Job Descriptions：

Responsibilities:

1. Responsible for the company's product function research and development, structural design and program optimization
2. Mechanical design, system design, stress analysis, thermal field analysis and related work
3. Project management, project schedule
4. Installation and debugging of equipment
5. Parts selection, procurement and quality evaluation in R & D phase.

Job requirements:

1. Master degree or above, major in mechanical, mechanics, heat flow, etc; Background in heat transfer, hydrodynamics, heat flow analysis and simulation is preferred
2. Familiar with non-standard mechanical and electrical equipment, vacuum mechanical equipment, precision equipment, semiconductor equipment and other related mechanical design workers are preferred
3. Strong ability to work independently, self-learning and development, teamwork spirit, good English reading ability
4. Relevant working experience is preferred.

Job Descriptions：

Responsibilities:

1. Responsible for the company's product function research and development, structural design and program optimization
2. Mechanical design, system design, stress analysis, thermal field analysis and related work
3. Project management, project schedule
4. Installation and debugging of equipment
5. Parts selection, procurement and quality evaluation in R & D phase.

Job requirements:

1. Master degree or above, major in mechanical, mechanics, heat flow, etc; Background in heat transfer, hydrodynamics, heat flow analysis and simulation is preferred
2. Familiar with non-standard mechanical and electrical equipment, vacuum mechanical equipment, precision equipment, semiconductor equipment and other related mechanical design workers are preferred
3. Strong ability to work independently, self-learning and development, teamwork spirit, good English reading ability
4. Relevant working experience is preferred.

Job Descriptions：

Responsibilities:

1. Responsible for the company's product function research and development, structural design and program optimization
2. Mechanical design, system design, stress analysis, thermal field analysis and related work
3. Project management, project schedule
4. Installation and debugging of equipment
5. Parts selection, procurement and quality evaluation in R & D phase.

Job requirements:

1. Master degree or above, major in mechanical, mechanics, heat flow, etc; Background in heat transfer, hydrodynamics, heat flow analysis and simulation is preferred
2. Familiar with non-standard mechanical and electrical equipment, vacuum mechanical equipment, precision equipment, semiconductor equipment and other related mechanical design workers are preferred
3. Strong ability to work independently, self-learning and development, teamwork spirit, good English reading ability
4. Relevant working experience is preferred.

Job Descriptions：

Responsibilities:

1. Responsible for the maintenance and sales of the company's key customers
2. Make and implement annual sales plan for key customers
3. Collect industry information, develop market, find new customers and new sales opportunities, and realize equipment sales
4. Key customer relationship maintenance and management, improve customer satisfaction
5. Be responsible for equipment delivery, installation, accounts receivable, warranty and spare parts sales in the whole sales cycle;

Job requirements:

1. Bachelor degree or above
2. Major in mechanical, electrical, physics and chemistry At least
3. 5 years related working experience
4. Sales experience of IC manufacturing equipment
5. Proficient in operating office software, good English communication skills.

Job Descriptions：

Responsibilities:

1. Responsible for the maintenance and sales of the company's key customers
2. Make and implement annual sales plan for key customers
3. Collect industry information, develop market, find new customers and new sales opportunities, and realize equipment sales
4. Key customer relationship maintenance and management, improve customer satisfaction
5. Be responsible for equipment delivery, installation, accounts receivable, warranty and spare parts sales in the whole sales cycle;

Job requirements:

1. Bachelor degree or above
2. Major in mechanical, electrical, physics and chemistry At least
3. 5 years related working experience
4. Sales experience of IC manufacturing equipment
5. Proficient in operating office software, good English communication skills.

Job Descriptions：

Responsibilities:

Responsible for the process development and implementation of IC products from wafer and package testing, including:
1. Develop plasma enhanced chemical vapor deposition (PECVD) technology for semiconductor thin films (silicon oxide, silicon nitride, silicon carbide, etc.) on 12 inch wafers, and continuously improve and optimize film deposition technology and film material properties
2. Use, maintain and manage analytical equipment and instruments for thin film materials
3. Track and master the market trends of 12 inch semiconductor equipment at home and abroad, the latest status and development trend of semiconductor preparation technology, and apply new materials, new processes and new technologies
4. Formulate and implement improvement suggestions on the basis of understanding and mastering the functions and characteristics of semiconductor manufacturing equipment
5. Be able to travel in the client according to the needs of the company.

Job requirements:

1. Master degree or above, major in chemical engineering, materials science or other related fields
2. At least 1 year working experience in related position, process experience in IC industry, thin film testing experience is preferred
3. Must have certain English foundation
4. Be able to prepare process related documents, participate in product defect analysis and provide solutions
5. Team spirit and cooperation spirit.

Job Descriptions：

Responsibilities:

Responsible for the process development and implementation of IC products from wafer and package testing, including:
1. Develop plasma enhanced chemical vapor deposition (PECVD) technology for semiconductor thin films (silicon oxide, silicon nitride, silicon carbide, etc.) on 12 inch wafers, and continuously improve and optimize film deposition technology and film material properties
2. Use, maintain and manage analytical equipment and instruments for thin film materials
3. Track and master the market trends of 12 inch semiconductor equipment at home and abroad, the latest status and development trend of semiconductor preparation technology, and apply new materials, new processes and new technologies
4. Formulate and implement improvement suggestions on the basis of understanding and mastering the functions and characteristics of semiconductor manufacturing equipment
5. Be able to travel in the client according to the needs of the company.

Job requirements:

1. Master degree or above, major in chemical engineering, materials science or other related fields
2. At least 1 year working experience in related position, process experience in IC industry, thin film testing experience is preferred
3. Must have certain English foundation
4. Be able to prepare process related documents, participate in product defect analysis and provide solutions
5. Team spirit and cooperation spirit.

Job Descriptions：

Responsibilities:

Responsible for the process development and implementation of IC products from wafer and package testing, including:
1. Develop plasma enhanced chemical vapor deposition (PECVD) technology for semiconductor thin films (silicon oxide, silicon nitride, silicon carbide, etc.) on 12 inch wafers, and continuously improve and optimize film deposition technology and film material properties
2. Use, maintain and manage analytical equipment and instruments for thin film materials
3. Track and master the market trends of 12 inch semiconductor equipment at home and abroad, the latest status and development trend of semiconductor preparation technology, and apply new materials, new processes and new technologies
4. Formulate and implement improvement suggestions on the basis of understanding and mastering the functions and characteristics of semiconductor manufacturing equipment
5. Be able to travel in the client according to the needs of the company.

Job requirements:

1. Master degree or above, major in chemical engineering, materials science or other related fields
2. At least 1 year working experience in related position, process experience in IC industry, thin film testing experience is preferred
3. Must have certain English foundation
4. Be able to prepare process related documents, participate in product defect analysis and provide solutions
5. Team spirit and cooperation spirit.

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities

1. Responsible for the company's document review, accounting treatment and accounting voucher preparation;
2. Be responsible for the cost accounting of the company; Responsible for the company's daily tax treatment;
3. Be responsible for issuing the company's financial report and various required statements.
4. Responsible for preparing financial budget and budget control according to the requirements of the company.
5. Other related work assigned by the Department.

Job requirements

1. Full time bachelor degree, major in finance and related;
2. Intermediate accountant title;
3. Familiar with Excel, word, PPT and other office software;
4. Familiar with Kingdee, sap and other financial software;
5. At least 2 years working experience in large and medium-sized enterprises; Under 40 years old;
6. Good sense of responsibility and enterprising spirit; Have comprehensive financial professional knowledge, financial processing and financial management experience.

Job Descriptions：

Responsibilities:

1. Responsible for RF Design of new products
2. Responsible for communication and coordination of various technical issues in RF design
3. Complete feasibility analysis and certification of various RF designs;

Job requirements:

Major in microelectronics, plasma, etc

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Process debugging and optimization of PECVD products
2. Analyze and solve the process and equipment problems of client PECVD equipment
3. Cooperate with the daily monitoring and maintenance of customer's production line
4. Responsible for the communication between the client and the company headquarters

Job requirements:

1. Bachelor degree or above, major in chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor, etc.
2. Have a strong learning ability, proactive, conscientious and responsible, good at communication, can establish a good relationship with customers
3. Process experience in semiconductor industry is preferred.

Job Descriptions：

Responsibilities:

1. Responsible for the machine installation certification work
2. Responsible for the safety audit and certification promotion of domestic devices
3. Responsible for on-site S2 & amp; S6 testing and safety manual writing
4. Research IEC / en and other international standards, guide product design and testing.

Job requirements:

1. Major in electrical, chemistry and related fields, bachelor degree or above, with unlimited experience
2. Have good English reading and writing ability and strong learning ability
3. Good communication, coordination and organization skills.

Job Descriptions：

Responsibilities

1. Responsible for the company's document review, accounting treatment and accounting voucher preparation;
2. Be responsible for the cost accounting of the company; Responsible for the company's daily tax treatment;
3. Be responsible for issuing the company's financial report and various required statements.
4. Responsible for preparing financial budget and budget control according to the requirements of the company.
5. Other related work assigned by the Department.

Job requirements

1. Full time bachelor degree, major in finance and related;
2. Intermediate accountant title;
3. Familiar with Excel, word, PPT and other office software;
4. Familiar with Kingdee, sap and other financial software;
5. At least 2 years working experience in large and medium-sized enterprises; Under 40 years old;
6. Good sense of responsibility and enterprising spirit; Have comprehensive financial professional knowledge, financial processing and financial management experience.

Job Descriptions：

Responsibilities

1. Responsible for the company's document review, accounting treatment and accounting voucher preparation;
2. Be responsible for the cost accounting of the company; Responsible for the company's daily tax treatment;
3. Be responsible for issuing the company's financial report and various required statements.
4. Responsible for preparing financial budget and budget control according to the requirements of the company.
5. Other related work assigned by the Department.

Job requirements

1. Full time bachelor degree, major in finance and related;
2. Intermediate accountant title;
3. Familiar with Excel, word, PPT and other office software;
4. Familiar with Kingdee, sap and other financial software;
5. At least 2 years working experience in large and medium-sized enterprises; Under 40 years old;
6. Good sense of responsibility and enterprising spirit; Have comprehensive financial professional knowledge, financial processing and financial management experience.

Job Descriptions：

Responsibilities:

1. Assist the resident in charge to formulate and implement the EHS management and training plan, and organize the EHS related training
2. Responsible for office fire control and emergency management in the station; Investigation and analysis of accidents and follow-up rectification measures, and timely report
3. Manage the client site according to the customer's requirements, participate in EHS meetings and convey and implement relevant policies and requirements
4. Communicate and report with EHS director regularly
5. Finish other work assigned by the supervisor;

Job requirements:

1. Bachelor degree or above, more than 1 year EHS related working experience
2. Be familiar with ISO14001 & amp; 45001 system standard knowledge, and mechanical safety, electrical safety, fire safety and other basic knowledge
3. Proficient in office software, good communication and coordination skills.

Job Descriptions：

Responsibilities:

1. Assist the resident in charge to formulate and implement the EHS management and training plan, and organize the EHS related training
2. Responsible for office fire control and emergency management in the station; Investigation and analysis of accidents and follow-up rectification measures, and timely report
3. Manage the client site according to the customer's requirements, participate in EHS meetings and convey and implement relevant policies and requirements
4. Communicate and report with EHS director regularly
5. Finish other work assigned by the supervisor;

Job requirements:

1. Bachelor degree or above, more than 1 year EHS related working experience
2. Be familiar with ISO14001 & amp; 45001 system standard knowledge, and mechanical safety, electrical safety, fire safety and other basic knowledge
3. Proficient in office software, good communication and coordination skills.

Job Descriptions：

Responsibilities:

1. Organize and implement recruitment, including but not limited to the organization and implementation of special job fairs, resume screening, interview arrangement, employment communication and approval, offer issuance and relevant preparation before employment
3. Responsible for handling five insurances and one fund for employees and commercial insurance
3. Hardware data acquisition and processing
4. Be responsible for foreign experts' entry, work related documents and other foreign affairs
5. Follow up the science and technology related policies issued by government departments in time, and be responsible for project planning and information collection
6. Organize and participate in the project declaration, acceptance, closing and other work, responsible for project related subsidies, tariff qualification review
7. Cooperate with national and local departments and alliances to organize research, statistics, report and summarize materials, maintain daily communication with project leaders, and maintain good relationship.

Job requirements:

1. Bachelor degree or above, major in human resource, English, law and engineering
2. At least 3 years HR recruitment experience, semiconductor industry is preferred
3. Familiar with recruitment process and recruitment channels, familiar with national laws and regulations on labor contract and human resource management
4. Affinity, strong communication skills, good team spirit and organization and coordination ability
5. Positive and enterprising, optimistic and cheerful, hardworking, willing to grow together with the company.

Job Descriptions：

Responsibilities Ⅰ

1. Electrical and mechanical assembly of PM module and platform module
2. Master the assembly, docking, dismantling and other work of the whole machine and pass the examination
3. Other work assigned by the superior leader.

Responsibilities II

1. Routine inspection, record and document management, operation process and system improvement of auxiliary equipment and fire fighting equipment on the daily site
2. Contract approval process management and document management
3. Master the basic operation of auxiliary equipment and pass the assessment
4. According to the actual situation of the site, the improvement suggestions are put forward
5. Other work assigned by the superior leader.

Responsibilities Ⅲ

1. Responsible for the installation and debugging of the client equipment
2. Responsible for technical support work on the site
3. Responsible for technical support and testing of Shenyang laboratory.

Job requirements

College degree or above, major in software, electrical, automation, control and other related fields

Job Descriptions：

Responsibilities:

1. Assist in drafting and revising various legal documents
2. Follow up the performance of the contract and feed back the performance problems in time
3. Assist in the establishment and closing of legal projects, and be responsible for data collection, summary and information feedback
4. Track the time progress of litigation or arbitration cases and file relevant documents
5. Be responsible for organizing and completing the legal training within the company
6. Assist to complete the audit of the company's internal documents
7. Complete the work arranged by the Secretary Office in a timely and efficient manner.

Job requirements:

1. Bachelor degree or above, major in law or other related fields
2. Good learning and logical thinking ability
3. Good obedience and execution
4. Good coordination and common ability.

Job Descriptions：

Responsibilities I (Electrical / Automation / mechanical direction)

1. Installation and maintenance of client equipment;
2. Receive client machine fault problems and conduct on-site troubleshooting

Job requirements

Electrical, automation, machinery and other related majors

Responsibilities II (process direction)

1. Process commissioning and maintenance of client machine;
2. Development and optimization of client customization process.

Job requirements

Chemistry, chemical engineering, physics, materials science and engineering, electronic engineering, microelectronics, semiconductor and other related majors

Job Descriptions：

Responsibilities:

1. Responsible for the management and maintenance of clean room, machine and accessory equipment
2. Responsible for the organization and implementation of factory construction requirements
3. Prepare operation instructions or reports on equipment operation, maintenance, repair, emergency plan, etc
4. Cooperate with process department in product process development
5. Participate in the improvement of existing products.

Job requirements:

1. Bachelor degree or above, major in mechanical and electrical engineering, familiar with office software
2. 1-3 years working experience, excellent fresh graduates are also acceptable
3. Pass CET-4 and be able to read English documents
4. Factory related working experience is preferred.

Job Descriptions：

Responsibilities

1.Establish requirements for semiconductor equipment systems and components
2.Organize, participate, and lead in the feasibility studies, conceptualization, modeling, analysis, development, documentation, and test/validation of hardware associated with new semiconductor equipment
3.Develop and present reports/presentations that communicate design intent, analysis, and validation at executive-level meetings.
4.Lead multi-disciplinary development teams, serve as an expert resource for a product or technical area, and directly support personnel in the preparation of detailed design, design testing and prototype fabrication
5. Analyze designs developed – may need to perform structural analysis (FEA), thermal and fluid flow analysis, and Failure Modes and Effects Analysis (FMEA)
6. Lead problem solving teams including root cause identification, brainstorming and conceptual development
7.Work with potential suppliers to ensure parts can be manufactured in accordance with performance and cost objectives
8.Provide on-job training (OJT) for other engineers

Qualifications

1.Engineering background with thermal designs and/or RF system designs coupled with solid engineering skills
2.Minimum of 12 years related engineering experience with a Bachelor’s degree; or 8 years and a Master’s degree; or a PhD with 5 years’ experience; or equivalent experience
3.Extremely knowledgeable using 3D-CAD tools, strong hands-on experimental and design capability
4.Excellent presentation skills; present progress on large cross-functional initiatives at executive-level meetings
5.Strong skills and experiences in problem solving, time and priority management, communication, and project management

Preferred Qualifications

Semiconductor industry experience is not required, but a plus.

Job Descriptions：

Responsibilities

1.Establish requirements for semiconductor equipment systems and components
2.Organize, participate, and lead in the feasibility studies, conceptualization, modeling, analysis, development, documentation, and test/validation of hardware associated with new semiconductor equipment
3.Develop and present reports/presentations that communicate design intent, analysis, and validation at executive-level meetings.
4.Lead multi-disciplinary development teams, serve as an expert resource for a product or technical area, and directly support personnel in the preparation of detailed design, design testing and prototype fabrication
5. Analyze designs developed – may need to perform structural analysis (FEA), thermal and fluid flow analysis, and Failure Modes and Effects Analysis (FMEA)
6. Lead problem solving teams including root cause identification, brainstorming and conceptual development
7.Work with potential suppliers to ensure parts can be manufactured in accordance with performance and cost objectives
8.Provide on-job training (OJT) for other engineers

Qualifications

1.Engineering background with thermal designs and/or RF system designs coupled with solid engineering skills
2.Minimum of 12 years related engineering experience with a Bachelor’s degree; or 8 years and a Master’s degree; or a PhD with 5 years’ experience; or equivalent experience
3.Extremely knowledgeable using 3D-CAD tools, strong hands-on experimental and design capability
4.Excellent presentation skills; present progress on large cross-functional initiatives at executive-level meetings
5.Strong skills and experiences in problem solving, time and priority management, communication, and project management

Preferred Qualifications

Semiconductor industry experience is not required, but a plus.

Job Descriptions：

Responsibilities:

Responsible for the process development and implementation of IC products from wafer and packaging testing, including:
1. Develop plasma enhanced chemical vapor deposition (PECVD) technology for semiconductor thin films (silicon oxide, silicon nitride, silicon carbide, etc.) on 12 inch wafers, and continuously improve and optimize film deposition technology and film material properties
2. Use, maintain and manage analytical equipment and instruments for thin film materials
3. Track and master the market trends of 12 inch semiconductor equipment at home and abroad, the latest status and development trend of semiconductor preparation technology, and apply new materials, new processes and new technologies
4. Formulate and implement improvement suggestions on the basis of understanding and mastering the functions and characteristics of semiconductor manufacturing equipment
5. Be able to travel in the client according to the needs of the company.

Qualifications:

1. Bachelor degree or above, major in chemical engineering, material science or other related fields; Can practice for more than half a year
Excellent can relax the requirements, specific salary negotiable.

Job Descriptions：

Responsibilities:

1. Plan and maintain the operation of the company's intellectual property system; Formulate all kinds of intellectual property management regulations, coordinate intellectual property management, divide the management scope and responsibilities of each post, guide, supervise and inspect the intellectual property management of other departments
2. Review the application of business department, organize and establish intellectual property archives management
3. Responsible for R & D project intellectual property layout, intellectual property application and other external work
4. Search and analysis of patents, trademarks and other intellectual property rights
5. Participate in signing or reviewing all kinds of contracts and agreements involving the intellectual property content of the specialty, and establish intellectual property contract files
6. Organize publicity and learning about intellectual property, promote and assist R & D personnel to complete technology R & D work.

Job requirements:

1. Bachelor degree in science and engineering, with a certain degree of mechanical, material, electrical, chemical and other professional knowledge
2. More than 3 years of semiconductor equipment and related industry experience, more than 2 years of patent analysis experience; Familiar with China's intellectual property legal system and related policy system and general legal system and policy
3. Understand patent mining and patent early warning, have strong communication skills, familiar with the whole process of patent writing and application
4. Ability to analyze, summarize, judge and solve problems, strong logical ability; Have the ability to use intellectual property knowledge to solve and deal with intellectual property litigation and management problems
5. Responsible and self-motivated, with continuous learning ability, teamwork and integration ability
6. Intermediate intellectual property rights engineer, patent agent qualification is preferred
Specific salary can be negotiated according to experience and interview results

Job Descriptions：

Responsibilities:

1. Semiconductor market technology analysis, equipment, process and application research and data collation
2. New market research, including semiconductor and pan semiconductor industries, to demand new opportunities
3. Analyze the customer's advanced manufacturing process and products, sort out the customer's needs, and provide relevant information for the company's products
4. Market supplementary information collection (MRS report) of all equipment products and new process applications of the company
5. Information collection and analysis of existing competitors' hardware and software, as well as analysis of potential competitors
6. Sales technical training and support
7. Product upgrade and CIP package configuration and report writing
8. Product brochures and technical bulletins
9. Market project management of new process and new design
10. Assist to complete the project application of science and Technology Department, the data arrangement and audit of listing materials, and the arrangement and writing of external publicity materials

Job requirements:

1. Bachelor degree or above
2. More than 3 years working experience in semiconductor industry, microelectronics, physics, chemistry, optics, etc.
3. Have data analysis ability, strong learning ability and language expression ability
4. Proficient in office software, Excel and PPT
5. English translation of CET-6 or above
6. Accept business trip

Job Descriptions：

Responsibilities:

1. responsible for the R & D and design of optical system
2. guide the installation and testing of the optical system designed
3. verify and improve the optical system to achieve the design goal.

Job requirements:

1. master degree or above in physics electronics, physics, laser technology, optical information science and technology, optical engineering, etc
2. proficient in geometry optics, laser and other related professional knowledge
3. familiar with ZEMAX, code V and other optical design software
4. experience in design and installation of practical optical system is preferred
5. be responsible, patient and meticulous, have strong hands-on ability, and have strong self-study ability and innovation ability
6. have good communication skills, team work spirit and professional quality.

Job Descriptions：

Responsibilities:

1. Responsible for product function research and development, systematic structure design and scheme optimization. Participate in stress analysis, thermal field and flow field analysis, or use the calculation results to design improvement and plan the direction of new design according to the calculation results of the calculation department
2. Equipment installation and commissioning, problem analysis, improvement and product release
3. On site troubleshooting, analysis of mechanical and component problems and proposal and implementation of short-term and long-term solutions
4. In the R & D stage of parts selection, procurement and quality evaluation, assist the quality engineer to do a good job in testing standards and plans, testing tools and testing means
5. Project management, project schedule.

Job requirements:

1、  Master degree or above, major in machinery, mechanics, heat flow and other related majors, with more than 5 years of design experience in mechanical design enterprises. Or bachelor degree, working in related industries for more than 8 years
2、  Familiar with non-standard mechanical and electrical equipment, vacuum mechanical equipment and other design standards and specifications, systematic design experience related to vacuum equipment and semiconductor equipment, PECVD equipment and ALD equipment, semiconductor metal materials and semiconductor ceramic materials are preferred
3、  Background in heat transfer analysis, hydrodynamics analysis, CFD and simulation is preferred
4、  Strong ability to work independently, self-study and develop. Have team leadership ability, ability and sense of responsibility to guide the progress of young engineers and assist in completing projects together
5、  Have teamwork spirit, be good at communicating with internal and cross departments, and also need to have a certain ability to communicate with suppliers and customers
6、  Good English reading ability.

Job Descriptions：

Responsibilities:

1. Responsible for the establishment of technical support team, the development of training plans, personnel training and assessment
2. Do a good job in personnel management, spare parts management and tool management to ensure efficient and orderly work
3. Do a good job in the work safety and work discipline requirements (EHS & amp; 6S）
4. Lead the team to do a good job in customer service and client site technical support, supervise the machine installation and maintenance, troubleshooting, process debugging, and complete the machine up time, equipment installation, process verification and CIP verification goals set by the company on schedule
5. Promote other perfect equipment projects and follow up high priority items
6. Cooperate with all departments to promote client process validation and maintain customer relationship to facilitate business development
7. Supervise the preparation of relevant instructions and SOP
8. Management and maintenance of client office and dormitory
9. Travel to support client troubleshooting and market promotion
10. Other assignments.

Job requirements:

1. Bachelor degree or above
2. Major in mechanical, electrical, physics and chemistry
At least 3.5 years working experience in semiconductor industry
4. Working experience in Fab or vendor of semiconductor equipment
5. Proficient in operating office software, good English communication skills.

Job Descriptions：

Responsibilities:

1. Responsible for the establishment of technical support team, the development of training plans, personnel training and assessment
2. Do a good job in personnel management, spare parts management and tool management to ensure efficient and orderly work
3. Do a good job in the work safety and work discipline requirements (EHS & amp; 6S）
4. Lead the team to do a good job in customer service and client site technical support, supervise the machine installation and maintenance, troubleshooting, process debugging, and complete the machine up time, equipment installation, process verification and CIP verification goals set by the company on schedule
5. Promote other perfect equipment projects and follow up high priority items
6. Cooperate with all departments to promote client process validation and maintain customer relationship to facilitate business development
7. Supervise the preparation of relevant instructions and SOP
8. Management and maintenance of client office and dormitory
9. Travel to support client troubleshooting and market promotion
10. Other assignments.

Job requirements:

1. Bachelor degree or above
2. Major in mechanical, electrical, physics and chemistry
At least 3.5 years working experience in semiconductor industry
4. Working experience in Fab or vendor of semiconductor equipment
5. Proficient in operating office software, good English communication skills.

Job Descriptions：

Responsibilities

1. Functional requirements analysis of equipment;
2. Design of equipment control software framework;
3. Hardware data acquisition and processing;
4. Control software development and related algorithm research;
5. Maintenance and on-site commissioning of control system and software;

Job requirements

1. Bachelor degree or above, major in computer, automation or related;
2. Familiar with windows and other embedded system development, C / / C # / C + + language, understand the principle and programming of real-time operating system and network, and be proficient in using visual studio and other development tools;
3. Strong independent working ability and team spirit;
4. Relevant working experience is preferred.

Job Descriptions：

Responsibilities

1. Functional requirements analysis of equipment;
2. Design of equipment control software framework;
3. Hardware data acquisition and processing;
4. Control software development and related algorithm research;
5. Maintenance and on-site commissioning of control system and software;

Job requirements

1. Bachelor degree or above, major in computer, automation or related;
2. Familiar with windows and other embedded system development, C / / C # / C + + language, understand the principle and programming of real-time operating system and network, and be proficient in using visual studio and other development tools;
3. Strong independent working ability and team spirit;
4. Relevant working experience is preferred.

Job Descriptions：

Responsibilities

1. Functional requirements analysis of equipment;
2. Design of equipment control software framework;
3. Hardware data acquisition and processing;
4. Control software development and related algorithm research;
5. Maintenance and on-site commissioning of control system and software;

Job requirements

1. Bachelor degree or above, major in computer, automation or related;
2. Familiar with windows and other embedded system development, C / / C # / C + + language, understand the principle and programming of real-time operating system and network, and be proficient in using visual studio and other development tools;
3. Strong independent working ability and team spirit;
4. Relevant working experience is preferred.